There are many reasons you might choose to buy arduino ir receiver but it is not easy to find the best suitable arduino ir receiver for you. But don’t worry! We did some of the work for you already by researching a few models on the current market. Let’s check following article to find the best arduino ir receiver.
Best arduino ir receiver
1. SunFounder Infrared Sensitive IR Receiver Sensor Module for Arduino and Raspberry Pi
FeatureAn infrared receiver module that uses a 1838b highly sensitive IR receiver
Low cost, wide-angle, and long-distance receiving
Output levels compatible with TTL and CMOS level, activated by low level
With power light and indicator of digital signal output
Working voltage: 3-5V DC; PCB size: 2.0 x 2.0 cm
2. MagicW Digital 38khz Ir Receiver 38khz Ir Transmitter Sensor Module Kit for Arduino Compatible
FeatureBased on the 38KHz IR Receiver Sensor
1pcs 38KHz IR Receiver Sensor and 1pcs 38KHz IR Transmitter Sensor
Can be used for remoter control,Can be compatible with Wrobot Digital 38KHz IR Transmitter Sensor
Power Supply : 5V
Modulate Frequency : 38Khz
3. C.J. Shop DAOKI IR Infrared Wireless Remote Control Kits Sensor Board 38KHZ for Arduino AVR PIC
FeatureArduino mini infrared wireless remote control kit consists of ultra-thin infrared remote control and 38KHz infrared receiver module.
IR receiver module can receive standard 38KHz modulation remote control signal. You can decode the remote control signal through Arduino programming.
This mini slim infrared remote control with 20 function keys. Its transmit distances up to 8 meters. Ideal for handling a variety of equipment indoors.
You can design a variety of remote control robots and interactive works.
4. Gikfun 5mm 940nm LEDs Infrared Emitter and IR Receiver Diode for Arduino (Pack of 20pcs) EK8443
FeatureInfrared diodes are characterized by strong structure, corrosion resistance, high reliability and long life.
5003MD is a high speed and high sensitive PIN
photodiode in a standard 5 plastic package.
The device is matched to infrared emitting diode.
Infrared emitter can be used for ordinary electronic devices, such as office equipment, communication equipment, and house decoration.
5. Gikfun Infrared Diode Led IR Emission and Receiver for Arduino (Pack of 10 Pairs) EK8460
Feature10PCS VS1838B Infrared receiver and 10PCS 5mm 940nm IR infrared Emission Tube LED Lamp
The ir receiver is a small design with a built-in dedicated IC that is highly resistant to interference and can withstand environmental interference.
The infrared diode's pin is not easy to be oxidized, it is easy to be tinned, and the solderability is good;
Long service life, no red storm, high reliability
Suitable for infrared products such as electronic toy remote control, infrared camera, infrared temperature measurement, etc.
6. ELEDIY 20Pcs IR Receiver Diode VS1838B - 38KHZ
FeatureA miniaturized receiver for infrared remote control and IR data transmission. This VS1838B IR Receiver Modules is widely application to AV instruments such as Audio, TV, VCR, CD, DVD, MD etc. Home appliances such as Air conditioner, Fan etc. The other equipments with wireless remote control
7. ARCELI CTYRZCH HX1838 Infrared Remote Control Module IR Receiver Module DIY Kit HX1838 for Arduino Raspberry Pi
FeatureSensor uses HX1838, high sensitivity
Operating voltage 5V
VCC external 3.3V-5V voltage (can be directly connected with the a 5v microcontroller and 3.3v microcontroller)
GND external GND IN an external microcontroller I / O port, I / O port has been designed 10K pull-up resistor
8. KOOBOOK 2Pcs Digital 38KHz Infrared IR Receiver Sensor Module for Arduino Compatible
FeatureIR is widely used in remote control. With this IR receiver, the Arduino project is able to receive command from any IR remoter controller if you have the right decoder.
It will be also easy to make your own IR controller using IR transmitter.
With 1838 remote control receiver, the sensitivity is high.
Operating voltage 5V, digital output, with data indicator.
2 fixing holes for easy installation, aperture 3.1mm, PCB size: 23.5*21.5mm.
9. KOOBOOK 2Sets HX1838 NEC Infrared IR Wireless Remote Control Sensor Module IR Receiver Module DIY Kit for arduino
FeatureSensor uses HX1838, high sensitivity.
Operating voltage 5V.
Output form: Digital output.
VCC: 3.3V-5V external voltage (can be directly connected to the 5v microcontroller and 3.3v microcontroller).GND: external GND.IN: external microcontroller I/O port, I/O port has been designed 10K pull-up resistor.
Kit theory test distance of about 5-8 meters, but the practical application depends on the ambient factors you use, as well as the middle barrier (such as diaphragm, glass, obstructions or other material blocking), receiving head with HX1838 with power work instructions lights, receive 38K frequency any remote coding data.
10. Gikfun Digital 38khz Ir Receiver Ir Transmitter Sensor Module Kit for Arduino (Pack of 3 Sets) EK8477
FeatureNote: The white smudge is not corrosion damage, it's flux, can wipe it off with a rag, does not affect the use of the module
This ir transmitter sensor module is directly launched by a single tube, it requires waveform modulation through the program.
It is suitable for infrared communication, infrared remote control, apply to a variety of platforms including Arduino/51/AVR/ARM
With signal indicating LED, easy to observe and debug.
Pin Definitions: (1) Output (2) Vcc (3) GND